Deutz — REMOVAL

4WD PROPELLER SHAFT 6 - While supporting the lower guard (6), remove the nut (7) with its washer and the bolt (8). 6 7 8 F0017831 7 - Remove the front bolts (9) and remove the lower guard (6). 9 9 F0017841 8 - Disconnect the pipes (10) of the left-hand suspension cylinder. Plug the ends of the pipes to prevent the entry of contaminants. Loosen the fittings of the flexible hoses by a few turns and, before removing them, push them to detach them from the couplers and thereby dis- charge any residual pressure from the system. 10 10 F0044700 9 - Disconnect the pipes (11) from the right-hand sus- pension cylinder. Label the pipes to avoid confusion on refitting.

Plug the pipes and the open fittings to prevent the entry of contaminants. 11 10 - Remove the bracket (12) and remove the pipes. 12 F0044710 30-66