Deutz — ASSEMBLY

POWER STEERING UNIT 9 - Bearing assembly diagram 17a - Inner sleeve 17b - Outer sleeve 21- Needle roller bearing 20 - Inner thrust washer 22 - Outer thrust washer The chamfer “ X ” of the outer thrust washer must be oriented towards the shoulder on the inner sleeve. 20 21 22 X 17 a 17 b D000 1181 10 - Position the steering unit (18) so that the central bore is horizontal. Insert the guide of tool T1 (code 5.9030.480.0) into the bore of the inner/outer sleeve assembly. T1 18 F000 9761 11 - Oil the seal (25a) and O-ring (25b) and fit them on the plunger of tool T1 (code 5.9030.480.0).

T1 25 a 25 b T1 F000 9771 12 - Assemble tool T1 (code 5.9030.480.0) and insert it in the guide previously inserted in the central bore of the power steering unit. 25 T1 F000 9781 30-84