POWER STEERING UNIT 13 - Push the seal (25) into the seating in the power steer- ing unit (18), turning it slightly to ensure correct posi- tioning. F000 9790 18 14 - Withdraw the tool T1 (code 5.9030.480.0) and the guide from the steering unit housing, leaving the seal installer plunger in place. T1 F000 9801 18 15 - Insert the spool assembly (17) in the bore of the power steering unit (18), turning its slightly to assist insertion. Insert the assembly while keeping the trim pin in a horizontal position. 17 F000 9810 18 16 - Push the spool assembly (17) fully home in order to ex- pel the seal installer plunger left in the bore in step 14. 18 17 F000 9820 30-85