FRONT LIFT ASSEMBLY 12 - Remove the upper bushes (16) but leave them in po- sition for safety. 16 F0018730 13 - Remove the lift assembly (6). If necessary, use a lever to separate the assembly from the front locating dowels. 6 F0018070 REFITTING THE LIFT ASSEMBLY Refitting is the reverse of removal. 1 Bolts M16: 214 Nm (158 lb.ft.) Bolts M20: 455 Nm (355 lb.ft.) 1 - Start the engine, repeatedly raise and lower the lift to its maximum travel to bleed the system and check for leaks. 2 - Stop the engine, check the gearbox oil level and top up if necessary. 30-100