Deutz — REFITTING

FRONT PTO ASSEMBLY REMOVAL OF THE FRONT PTO ASSEMBLY 1 - Remove the front lift assembly. (For details, see «REMOVAL OF THE FRONT LIFT AS- SEMBLY») 2 - Unplug the connector (1) and release the wiring from the clip (2). 2 1 F0018080 3 - Fully unscrew the bolts (3) securing the cardan shaft (4) to the flexible coupling (5) and detach the flange. 5 3 4 F0017312 4 - Unscrew the four bolts (6) but only remove the two lower bolts. Leave the two upper bolts in position for safety. 6 1 5 - Fit a non-slip block to a trolley jack; position the non- slip block under the PTO assembly.

6 - Remove the two upper bolts previously left for safety and remove the PTO assembly (7) while supporting the cardan shaft (4). If neccessary, use a lever to help separate the as- sembly from the tractor. PTO: 70 kg (154 lb.) F0018090 REFITTING THE FRONT PTO ASSEMBLY 7 Refitting is the reverse of removal. 1 Screw:214 Nm (157.7 lb.ft.) 30-101 F0018100