FRONT SUSPENSION CYLINDERS 5 - Withdraw the end cap (1) from the rod and remove in order the rod wiper (5), the seals (6), (7) and the guide (8). 1 9 Take care not to damage the seatings of the seals. 2 6 - Remove the O-ring seal (9). Note which way round the seals are fitted. 5 6 7 D000 5380 8 7 - Remove the seal (11) and the guide (12) from the pis- ton (10). Take care not to damage the seal seating. 10 11 12 D000 5390 2. Assembly Assembly is the reverse of disassembly. 1 End cap: 320 370 Nm (236–273 lb.ft.) 2 Seals: Gearbox oil 3 Piston eye: Loctite 638 Piston eye:
50 70 Nm (37–52 lb.ft.) 1 - Stake the lock washer tabs into the notch on the cyl- inder (2) and into one of the notches on the end cap (1). 1 2 F0041220 30-106