FRONT AXLE AND SWINGING SUPPORT REMOVAL OF THE FRONT AXLE AND SWINGING SUPPORT (Versions with front suspension) All operations are to be carried out with the parking brake applied. 1 - Remove the front suspension cylinders. (For details, see «REMOVAL OF THE FRONT SUS- PENSION CYLINDERS»). 2 - Position a trolley jack under the axle (2) and the swing- ing support; raise the jack until it supports both the as- semblies. Group assembly: 302 kg (665 lb.) F0044950 1 3 - Remove the cover and the 4WD shaft. (For details, see «REMOVAL OF THE 4WD PROPEL- LER SHAFT»). Disconnect the differential lock pipe (2). Plug the ends of the pipes to prevent the entry of contaminants.
2 F0044911 4 - Remove the support (3) of the position sensor (4) and unplug the connector (5). 1 5 3 4 F0018282 5 - Remove the plates (6) securing the pivot pins (7) of the swinging axle support (8). 6 - Loosen the screw of the clips for the rigid steering pipes and rotate the plate (6) to the left to release the pivot pin (7). 6 7 8 F0044960 30-107