Deutz — REFITTING

FRONT AXLE AND SWINGING SUPPORT REFITTING THE FRONT AXLE AND SWINGING SUPPORT Refitting is the reverse of removal. 1 Check the calibration of the position sensor. (For details, see «REMOVAL AND POSITIONING OF THE FRONT SUSPENSION POSITION SEN- SOR»). 2 Pivot pin and plain bearings: grease 1 - On starting the engine, bleed the systems as follows: a - turn the steering wheel repeatedly to full lock in both directions; b - repeatedly activate and deactivate the suspen- sion; c - repeatedly engage and disengage the differential lock. 2 - Stop the engine, check the gearbox oil level and top up if necessary.

3 - Lubricate fully the axle pivot pins, the swinging sup- port and cylinder and piston mountings. 30-109