Deutz — REFITTING

FRONT SUSPENSION VALVES REMOVAL OF THE FRONT SUSPENSION VALVES 1 - Before switching off the engine, disengage the front suspension by pressing the pushbutton in the cab for at least 20 seconds. 2 - Apply the parking brake. 1 Discharge the residual pressure from the suspension system by unscrewing the valve (1) about two full turns. Wait a few minutes after discharging the pressure, then re-close the valve. F0044891 1 - Unplug the connectors (2) from the solenoid valves (3). Label the connectors and solenoid valves to avoid confusion on reconnection. 3 2 3 2 F0044990 2 - Disconnect the five connecting pipes (4).

First loosen the fittings by a few turns, then, be- fore disconnecting the pipes, push them to de- tach them from the couplers and release any residual pressure. 4 3 - Remove the bolts (5) and remove the assembly (6). 5 5 6 F0045000 REFITTING THE FRONT SUSPENSION VALVES Refitting is the reverse of removal. 1 - Start the engine and repeatedly activate and deacti- vate the front suspension in order to expel any air from the system and check for leaks. 2 - Stop the engine, check the gearbox oil level and top up if necessary. 30-110