GEARBOX GEAR PUMP 6 - Turn the engine over by hand so that the slot for the machine key is in the top position. Using puller T3 (code 5.9030.895.0) withdraw the pump drive gear (7). Remove the machine key. T3 Take care not to drop the key into the crankcase. 7 F0045100 7 - Unscrew and remove the bolts (9) and remove the pump (1). Recover also the gasket (10) that should be re- newed on reassembly. 10 9 1 F0045110 REFITTING THE GEARBOX GEAR PUMP 10 Refitting is the reverse of removal. 1 - Position the gasket (10). To hold the gasket in place, apply grease to the contact surface of the engine. F0045120 2 - Position the machine key (11) on the pump shaft with the slot facing upwards.
Keep the flat face of the key inclined towards the gear hub spline. 11 F0045130 30-119