GEARBOX GEAR PUMP 3 - Fit the pump (1) and gear (7) simultaneously. To help seat the gear and the machine key cor- rectly, gently turn the pump (1). 1 7 F0045140 4 - Hold the gear (7) in position by hand tightening the nut (6) with the washer (8). 8 6 7 F0045090 5 - Tighten down the pump with the bolts (9). Tighten alternate bolts gradually in sequence. M10 bolts: 50±10 Nm (36.9±7.4 lb.ft.) 6 - Secure the gear (7) with the nut (6). M12x2.5 nut: 50±10 Nm (36.9±7.4 lb.ft.) 9 F0045111 7 - Remove the material closing the passage between the engine sump and fit the cover (5). Carefully check the condition of the O-ring (12). 12 5 F0045150 30-120