Deutz — DISASSEMBLY AND ASSEMBLY

LIFT CYLINDERS DISASSEMBLY AND ASSEMBLY OF THE LIFT CYLINDERS 1. Disassembly 1 - Withdraw the piston (1) to the point where the circlip (2) is visible through the hole of the delivery pipe fitting. 2 - Rotate the rod so that the gap in the circlip (2) is visible. 2 F000 9200 3 - Using a screwdriver through the delivery line hole, push one end of the circlip (2) towards the groove “ A in the piston (1) while simultaneously rotating the pis- ton (1) in order to release the circlip (2). 4 - Withdraw the complete piston assembly (1). 2 1 D000 0821 5 - Remove in sequence the wiper seal (4), the guide (5), the seal (6) and the second guide (7). Note which way round the seal is fitted.

1 2 4 5 6 7 D000 0830 2. Assembly Assembly is the reverse of disassembly. 1 Seal and guides: Gearbox oil. 2 Before inserting the piston, check that the guides are correctly positioned in the seatings in the cyl- inder. 30-132 A