Deutz — REFITTING

LIFT DRAFT SENSOR REMOVAL OF THE LIFT DRAFT SENSOR 1 - Remove the screws (1) and remove the cover (2) and the spacers (3). 1 3 2 F0020380 2 - Support the lever and remove the bracket (4) and then the sensor (5). 4 5 F0020390 3 - Release the wiring from the retaining straps and un- plug the sensor connector (6). The connectors are located under the cab and can be accessed from the left-hand side of the tractor. REFITTING THE LIFT DRAFT SENSOR Refitting is the reverse of removal. Make sure the sensor is installed the right way round. 30-137