Deutz — ASSEMBLY

STEERING COLUMN SWITCH UNIT AND THE SHUTTLE CONTROL LEVER 5 - Lift off the switch unit (7) and place it to one side. The contacts of the switch unit are protected by adhesive insulation material; recover this insu- lation as it will have to be repositioned. 7 F0041520 6 - Unplug the connector (9), remove the screws (10) and detach the shuttle control lever assembly (11). 11 10 9 F0041530 7 - Remove the shuttle control lever (11), detaching it from the cover (12). 11 12 F0041540 ASSEMBLY OF THE STEERING COLUMN SWITCH UNIT AND THE SHUTTLE CONTROL LEVER Refitting is the reverse of removal.

1 - Turn the ignition key to position “ I ” and check oper- ation of the direction indicators, lights and windscreen wiper. 2 - Start the engine and run it at idle speed ; engage a gear and check that the shuttle control lever functions correctly. 30-142