Deutz — REMOVAL

CENTRE CONSOLE AND SHROUD REMOVAL OF CENTRE CONSOLE AND SHROUD Remove the battery cover and disconnect the nega- tive battery lead (–). 1 - Remove the seat. (For details, see «REMOVAL OF THE DRIVER'S SEAT»). 1 2 - Remove the floor mats. 3 - Remove the steering wheel and steering column switch unit. (For details, see «REMOVAL OF THE STEERING WHEEL, STEERING COLUMN SWITCH UNIT AND INSTRUMENT PANEL».) 1 F0019030 4 - Unscrew and remove the screws (1). 5 - Remove the upper centre console (2) by lifting it up- wards. 2 F0019040 6 - Rotate the console (2) towards the rear of the tractor and unplug the connectors (3), (4) and (5).

Note that connectors and pushbuttons all bear identification marks with the exception of the 2nd pushbutton “ C ” from the left. The unmarked pushbutton is to be connected to its connector only on models equipped with a front lift. The connector marked 3a is not to be connected. 3 3 a 4 5 C 2 F0019050 7 - Loosen the grub screw (6), remove the accelerator pedal (7) and remove the front floor mat (8). 7 8 6 F0030551 30-143