CONTROL PANELS AND LEVERS OF THE AUXILIARY SERVICE VALVES AND THE PTO. 2.4 Removal of the lift control assembly and the hand throttle 1 - Unscrew and remove the two outer fixing screws (24) of the assembly (25). 25 24 F0045580 2 - Release the right-hand console (26) from its fixings and tilt it towards the centre of the cab in order to re- move the inner screws (27) and unplug the connectors (28). (For details, see «REMOVAL OF THE RIGHT- HAND CONSOLE»). 26 27 2 3 - Remove the lift control assembly. 28 F0045590 REFITTING THE CONTROL PANELS AND LEVERS OF THE AUXILIARY SERVICE VALVES AND THE PTO Refitting is the reverse of removal.
A 1 The slotted bush “ A ” securing the cable must be oriented towards the outer end of the fixing pin. 1 - Adjust the length of the control cables. (For details, see «RENEWAL OF THE AUXILIARY VALVE CONTROL CABLES»). F0019550 2 If a new hand throttle is fitted, it will have to be cal- ibrated. (See the SERDIA program in section 20). 30-166