Deutz — REMOVAL (Figures refer to the speed selector)

RENEWAL OF THE PTO ENGAGEMENT AND SELECTION CONTROL CABLES RENEWAL OF THE PTO ENGAGEMENT AND SELECTION CONTROL CABLES REMOVAL (Figures refer to the speed selector) 1 - Remove the lever assembly relative to the cable to be renewed. (For details, see «REMOVAL OF LEVERS OF THE AUXILIARY SERVICE VALVES AND THE PTO»). F0045620 2 - Disconnect the control cable (1) from the control lever (2) and remove the yoke (3) to remove the outer cable (4). 1 2 3 4 F0019543 3 - Remove the front floor mat and remove the plate (5) of the cab guide (6) in order to release the outer cable to be renewed. 5 6 F0045401 4 - Loosen the fixing screw (7) of the gear lever gaiter (8).

5 - Raise the gaiter (8), unplug the connector (9) and with- draw the control cable to be renewed. 7 9 8 F0019580 30-167