Deutz — REFITTING

RENEWAL OF THE PTO ENGAGEMENT AND SELECTION CONTROL CABLES 6 - Disconnect the control cable end (11) from the lever (10) ; remove the outer cable retaining yoke and re- move the controlcable. 10 11 F0045391 REFITTING 1 - Extend the new cable and engage it in the cable guide (6). 2 - Connect the end fitting of the inner control cable (2) to the control lever (1) and secure the outer cable (3) with the yoke (4). 3 1 2 4 6 F0045600 3 - Fissare il gruppo leva (12) sulla consolle destra. 4 - Move lever (13) to the position corresponding to the position of lever (10). 12 13 10 F0045610 5 - Secure the outer cable with the yoke.

6 - Stretch the cable slightly to connect it to the fitting on the lever (10), making sure that the lever on the con- sole is still in the correct position. 10 F0045392 30-168