Deutz — RENEWAL

AUXILIARY SERVICE VALVE CONTROL CABLES RENEWAL OF THE AUXILIARY SERVICE VALVE CONTROL CABLES 1 - Remove the seat. (For details, see «REMOVAL OF THE DRIVER'S SEAT»). 2 - Remove the control levers assembly and disconnect the control cables to be renewed from the levers. (For details, see «REMOVAL OF THE CONTROL PAN- ELS AND LEVERS OF THE AUXILIARY SERVICE VALVES AND THE PTO»). F0045511 3 - Detach the right-hand console (1) from the cab, but do not unplug any of the connectors. (For details, see «OPENING AND REMOVAL OF THE RIGHT-HAND CONSOLE»). 1 F0019630 4 - Disconnect the outer cables (2) and inner cables (3) from the control valve assembly.

3 2 F0045292 5 - Remove the screws and remove the plate (4) securing the bulkhead gasket (5). Release the control cables (6) from the bulkhead fitting and withdraw them towards the rear of the tractor. 4 5 6 F0019650 30-170