AUXILIARY SERVICE VALVE CONTROL CABLES REFITTING THE AUXILIARY SERVICE VALVE CONTROL CABLES Refitting is the reverse of removal. 1 - Check that the control cable lever and the corre- sponding control valve lever are both in neutral. F0045650 2 - Fix the outer cables with the yokes (1). 3 - Connect the inner cables (2) to the control levers. 2 2 1 1 F0045521 4 - With the control lever in neutral position, lift the re- taining bush (3) and, while keeping the cable under slight tension, insert the end in the fitting (4).
4 3 F0045293 5 - Lower the retaining bush (3); check that the control valve spool travels through its full stroke and that the control lever is positioned centrally in its slot when the control valve is in neutral. For the cross-gate control lever, check the spool travel for both side-to-side and vertical move- ments of the lever. F0021550 30-171