PARKING BRAKE SWITCH ADJUSTMENT OF THE PARKING BRAKE SWITCH 1 - Remove the screws (1) and (2) and remove the shroud (3). 3 4 2 1 F0045660 2 - Operate the lever (4) repeatedly to eliminate any play in the mechanism. 4 3 - With the lever (4) fully lowered, adjust the height of the microswitch (5) by raising it to its maximum height and then lowering it to obtain the correct amount of resid- ual travel. Residual travel: 1 mm (0.04 in.) 4 - Replace the shroud (3). 5 F0045670 30-172