Deutz — 1.1 OVERVIEW

SERDIA ENTRY AND COMUNICATION 1. ENTRY AND COMMUNICATION 1.1 OVERVIEW Digital electronic engine ECUs have become a normal part of modern engine technology. These ECUs are designed, at the very least, to fulfil the functions of comparable mechnical modules (e.g. governors), as well as to provide additional functionality. SERDIA is required in order to make communication with these digital electronic DEUTZ ECUs possible. With a) an interface (cable with diagnostics plug and copy protection) and b) a commercially available notebook (or PC), SERDIA forms a special tool . 1.1.1 INTRODUCTION SERDIA is a software program.

Together with the notebook and the interface, it constitutes a tool which serves as an aid to communication with the engine ECUs. SERDIA supports DEUTZ ECUs EMR, EMS and MVS. You can also communicate with three different ECUs using just one software product. Any changes you wish to make to the ECUs as far as settings, parametrizations, error deletion and calibra-tion are con- cerned are only possible with SERDIA. SERDIA runs under the MS Windows®3.11 and Windows95(98) user surface. You can choose English or German as the user language when carrying out program installation. The user surface enables the user to call up the functions required simply by clicking on the appropriate buttons.

The menu points listed below are available: ECU selection Measured values Parameters Error memory Function test Extras 20-2