SERDIA ENTRY AND COMUNICATION 1.1.2 HARDWARE AND SOFTWARE You should have the following minimum system configuration in order to work with SERDIA: Hardware: Notebook o PC (IBM-AT compatible):....with 1 serial interface RS 232 (There should be no mouse connected) and par- allel printer interface Grafiphs carde:.......................................VGA/SVGA Processor: ..............................................80486 (or later) Frequenz:................................................100 MHz RAM:.......................................................8 MB RAM (or later) Hard disk (free memory capacity):
.........15 MB (or later) Diskdrive:................................................3,5” (1,44 MB) ECUs (engine): EMR (Elektronischer Motor-Regler)........Electronic engine governor, ECU TN 0211 1910 e 0211 2017 Software Version N° 12.1.08 and lower Diagnostics interface..............................Serial in ace. with ISO 9141 Interface, connector piece between ECU (engine) and PC: Level adaptator for ISO 9141, SAE J1708 e RS 485 Safety switch with dongle function, copy protection Power supply range 12-24 V Power supply side: Engine Protective switch against incorrect polarity and surge voltage Decoupling Software:
Operating system...................................DOS versione 5.0 or later User surface ...........................................MS-Windows 3.11 or Windows 95 Installation is also possible under Windows 3.1; however, this creates a specific Windows problem: Conflicts may occur when accessing serial interface COM1 (see Chapter 8, What should you do if...?). Further information is also given in the Readme file supplied with SERDIA). For proper display of the contents of the SERDIA windows under Windows 3.11, you should install the standard screen driver (VGA). 1.2 ORDERING SERDIA can be ordered, like the DEUTZ special tools, through: SAME-DEUTZ-FAHR ITALIA S.p.A. Viale F.
CASSANI, 15 24047 TREVIGLIO (BG) - ITALIA 1.2.1 FIRST-TIME USERS For first-time users, we recommend the SERDIA package Re-order No. 5.9030.740.4/10. Scope of supply: SERDIA software (1 x 3.5' installation diskette) Diagnostics interface with implemented user level Brief instructions on installation A list of tools and modifications usefui when troubleshooting, is included Carrying case 20-3