Komatsu — EVERY 500 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE 4 - 60 CHECK SWING PINION GREASE LEVEL, ADD GREASE Prepare a scale. 1. Remov e bolts ( 1) (2 bolts) on the top of the revolvin g frame and remove cover ( 2. Insert t he scal e into the grease passing throug h the pinion h as a heig ht of at least 16 mm (0.6 in). If th e level is low, add gr 3. Check if the g rease necess ary to Komats u distributor. Total a mount of grease: 9.1 l iters (2.4 US gal) [8.3 kg (18. 3 lb)] 4. Install c over (2) with bolts (1 milky white, is your LUBRICATE SWING CIRCLE 1. Lower t he work equipment t o the ground. 2. Using a greas e pump, pum fittings shown b y arrows. (2 places) 3.

After gr easing, wipe off any old greas e that w as pushed o ut