. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT Lock Pin (rear is locked) full position NOTICE 6 - 7 This pin (4) locks the control pedal. Position (a): Lock Position (b): Only front of pedal can be operated to full position Position (c): Both front and rear of peda l ca n be op erated t When not usin g the attachment, set t he l ock pin to position (a).
When using th e breaker, use the working mode selector switch on the monitor switch portion t o s et th e working m ode to B mode, and set the loc k pin to position ( b) when using th e pedal When using th e crusher, use the working mode selector switch on the monitor switch portio n to set the working mode to A TT mode, and set the lock pin to position (c) when u sing the pedal. When using the breaker, if the lock p in is set t o positio n (c) and the pedal is operated in direction (D ), it will cause damage or defective operati on of the breaker. T o preven t this, wh en using the breaker, always set the lock pin to position (b). Before changing the position of the lock pin, s top the