Komatsu — 24.6 EVERY 500 HOURS SERVICE

24. SERVICE PROCEDURE 24.6 EVERY 500 HOURS SERVICE Maintenance for every 50 and 250 hours should be car- ried out at the same time. 24.6.1 REPLACE FUEL FILTER CARTRIDGE A WARNING temperature immediately after the machine has been operated. Wait for engine to cool down before replacing the filter’. l Do not bring fire or sparks near the fuel. Prepare a filter wrench and a container to catch the fuel. 1. Set the container to catch the fuel under the filter car- tridge. 2. Using a filter wrench, turn filter cartridge 0 counterclock- wise to remove it. 3. Clean the filter holder, fill a new filter cartridge with clean fuel, coat the packing surface with engine oil, then install it . _.. . .

to the tllter holder. 4. When installing, tighten until the packing surface contacts the seal surface of the filter holder, then tighten it up about 2/3 of a turn. If the filter cartridge is tightened too far, the packing will be damaged and this will lead to leakage of fuel. If the fil- ter cartridge is too loose, fuel will also leak from the pack- ing, so always tighten to the correct amount. 5. After replacing filter cartridge 0, loosen air bleeding plug 0. 6. Loosen feed pump knob 0 and move the pump up and down to draw off fuel until air ceases to come out of air bleeding plug 0. 3-48