24. SERVICE PROCEDURE 24.73 CHANGE OIL IN STEERING CLUTCH CASE The oil is at high temperature immediately after the ma- chme has been operated. Wait for the oil to cool down before starting the operation. I A WARN’NG 0 Prepare the followings. Container to catch drained oil: Min. 30 Q capacity Refill capacity: 30 $? Socket wrench 0 a 1. Set a container to catch the oil under drain plug @ at the bottom of the machine. 2. Remove drain plug 8 slowly to avoid getting oil on your- self, and drain the oil. After draining the oil, tighten drain plug 8. 3. Refill the specified quantity of engine oil through oil filler 0. For details of the oil to use, see “20.
USE OF FUEL, COOL- ANT AND LUBRICANTS ACCORDING TO AMBIENT TEM- PERATURE”. 4. Check that the oil is at the specified level. For details, see “24.3 CHECK BEFORE STARTING”. 3-55