24. SERVICE PROCEDURE 24.7.4 CHANGE OIL IN FINAL DRIVE CASE A WARNING The oil is at high temperature immediately after the ma- chine has been operated. Wait for the oil to cool down before starting the operation. Prepare the followings. l Container to catch drained oil: Min. 15 II capacity l Refill capacity D31E, P-20, D37E-5: each 9.5 Q D31P-20A, D37E-5A: each 12 Q D31 PL, PLL-20: each 15 Q Socket wrench l Set a container to catch the oil under drain plug @. Remove drain plug @ and drain the oil. After draining the oil, tighten drain plug @. Refill the specified quantity of engine oil through oil filler 0. For details of the oil to use, see “20.
USE OF FUEL; COOL- ANT AND LUBRICANTS ACCORDING TO AMBIENT TEM- PERATURE”. Check that the oil is at the specified level. For details, see “24.5 EVERY 250 HOURS SERVICE”. 3-56