Komatsu — 13.2 LIFTING MACHINE

13. TRANSPORTATION 13.2.3 WEIGHT TABLE Model Work equipment Weight (kg) %I Without work equipment %2 Max. weight including work equrpment D31 P-20 Inside power angle power tiltdozer 6,870 7,400 D37P-5 Inside power angle power tiltdozer 7,020 7,560 D31 PLL-20 Outside straight tiltdozer 7,430 8,150 D31 E-20 Inside power angle power tiltdozer 6,270 I 6,840 D37E-5 Inside power angle power tiltdozer 6,550 I 7,150 %I : For inside type, with only blade removed Without side type, with blade assembly (including dozer frame and tilt cylinder) removed %2: With optional shoes and full roller guard added 13.2.4 PROCEDURE FOR LIFTING OPERATIONS 1.

Move the machine to a horizontal place and place it in a suitable position for the crane, then stop the engine and lock the brakes. Prepare a suitable wire rope and lifting equipment for the weight to be lifted, then fit the wire rope. For details, see “13.2.1 POSITION FOR STICKING LIFTING POSITION MARKS” and “13.2.2 METHOD OF FITTING WIRE ROPE”. Fit protectors at sharp corners and parts that bite into the wire rope in order to prevent the wire rope from being cut. Use a suitable size of sledder and bar so that the width does not contact the machine.

Raise the machine 100 - 200 mm from the ground, check that the machine is horizontal and that there is no slack in the wire rope, then continue to lift the machine. 2. 3. 4. 5. 2-47