Komatsu — 13.4 PRECAUTIONS FOR TRANSPORTATION

13. TRANSPORTATION 13.3 PRECAUTIONS FOR LOADING AND SECURING MAClilNE rA wARN’NG/ When the edge of the blade protrudes beyond the trailer, angle the blade. (Angledozer) After loading to the specified position, secure the machine as follows. 1. 2. 3. Lower the blade slowly to the ground. Lock all the control levers securely with the safety lever. Depress the brake pedal and pull the brake lock lever to apply the brakes. Move the fuel control lever to the low idling position and turn the starting switch key to the OFF position to stop the engine. Remove the key. Secure the machine as follows to prevent it from moving during transportation. 4. 5.

l Fit blocks @ under both ends of the left and right tracks. l Fit chains or wire according to procedure @ or @. 8: (When fitting chains or wire to the outside circum- ference of the track shoe) @: (When fitting chains or wire in the holes in the track shoe link) AE140950 l Insert wire protectors at the corners of the machine to prevent the wire from contacting any sharp corners. Check the height of the load and confirm that it is within the limits (tunnel side walls, height, bridges, branches of trees, etc.) for the transportation route, and that it fulfills the related laws and regulations for transportation. 6.

AE140960 13.4 PRECAUTIONS FOR TRANSPORTATION Determine the route for transporting the machine by Obey all state and local laws governing the weight, width and length of a load. Observe all regulations governing wide loads. 2-48