. OPERATION OPERATION OPERATION CHECK BEFORE STARTING ENGINE, ADJUST WARNING 4. Check for leakage from fuel line. Check that there is no leakage of fuel or damage to the hoses and tubes. If any problem is found, carry out repairs. damage to the hoses and tubes. If any problem is found, repair the oil 3 - 99 WALK-AROUND CHECK Before starting the engine, check the area around and under the machine, check for loose n uts and bol ts, damage t o any parts, leakage of oil, fuel, or coolan t, and check the condition of the work equipment a nd hydraul ic systems. Check for looseness or play in electric wiri ng and check that there is no dust accumulated aro und high-temperature parts.
Remove any flammable materials from around the battery, engine, muffler, turbocharger, or other high t emperature engine p arts. Leakage of fuel or oil will cause the machine to catch fire. Check carefully, be sure to repair any problem, or contact y our Komatsu distributor. If the machine is at an angle, reposition it Perform the following inspections and cle aning every day before starting engine for the day' 1. Check for damage, wear, play in work equipment, cylinders, linkage and hoses. Check that there are no cracks, exces sive wear, or play in the work equipment, cylinder s, linkage, or hose s. If any abnormality is found, repair it. 2.
Remove dirt and dust from around en gine, battery and radiator. Check if there is any dirt or dust accum ulated around the engine or radiator. Also check if t here is any flammable material (dead leaves, twigs, etc.) acc umulated around the battery or high temperature engine pa rts, suc h as the engine muffler or turbocharger. R emove all such dirt or flammable material. 3. Check for coolant or oil leakage arou nd the engine. Check that there is no oil leakage fro m the engine or coolant leakage from the cooling s ystem. If a ny problem is found, repair it. 5. Check for leakage of oil from transmis Check that there is no oil leakage. If 6.
Check for oil leakage from the brake l Check that there is no oil leakage or leakage and repair or replace the dam 7. Check for damaged or worn tires, wh eels, and wheel hub bolts and nuts, check for loos e wheel hu b bolts and nuts. Check for cracks or peeling of the tir es and for cracks or wear to the wheels (side rim, rim base, lock ring). nuts. If any abnormality is found, repair or replace the part. ew caps. Tighten any loose wheel hub bolts or nuts. If any abnormality is found, repair or replace If any valve caps are missing, install n