Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION WARNING appears to be no abnormality with the seat belt, replace it damage or deformation of the seat belt holders, replace the seat belt. 3 - 100 8. Check for damage and loos e bolts on the handrail and s teps. Repair any damage and tig 9. Check for damage to gauge s, lamps on the instrument p anel and loose Check for damage to the pa nel, gauges and lamps. If any problem is found, replace the parts. Clean off an y dir n the surface. Tighten any 10. Check for loose air cleaner Check for the loose bolts. If 11. Check for loose battery ter minals. T T T k ighte n any loose terminal. ightening torque for portio n A:

5.9 to 9.8 Nm (0.6 to 1.0 kgm) ightening torque for portion B: 11.8 to 19.6 Nm (1.2 to 2.0 gm) gm) 12. Check for damage to the se at belt and mounting c lamps Even if ther once every REMARK The date o f manufacture of the s eat belt is marked on th e belt at the plac e indicated by the arrow in the diagram on the righ t. Che ck that there are no loose bo lts on the equipment m ountin g the seat belt to the machine, and ti Tightening torque: 24.5 ± 4.9 N m (2.5 ± 0.5 kgm, 18.1 ± 3.6 If the belt i s damaged or fluff is starting to form, or if t here i s any