Komatsu — EVERY 250 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE and the Tightening torque: 825 to 1030 Nm (84 to 105 kgm, 607.6 to 759.9 lbft) 2. If any stud bolt is broken, replace all the stud bolts for that wheel. CLEAN ELEMENT IN AIR CONDITIONER RECIRCULATION FILTER 4 - 46 CHECK FOR LOOSE WHEEL HUB BOLTS, TIGHTEN If wheel hub nuts (1) ar increased accidents may be cause 1. Check for loose nuts , and tighten if necessary. When checking for l direction of tightening 1. Loosen knob (1), the n remove filter inspection cove r (2). 2. Remove filter (3) in th e direction shown b y the arro 3.

Use compressed air to clean the recirculated same way as for the Replace the filter wit cann removed with compre ssed air, or if it has been used for 1 year. REMARK If th e filter becomes clogg ed, the air flow will b e reduced, and t here will be an abnormal noise from the air conditione unit.