. MAINTENANCE SERVICE PROCEDURE EVERY 1000 HOURS SERVICE REPLACE FUEL MAIN FILTER CARTRIDGE WARNING Prepare a filter wrench 4. Clean the filter holder. NOTICE Do not fill the filter cartridge with fuel. Cap (A) is installed to prevent dirt from entering the inside of the filter cartridge. A 9 J A 0 7 6 3 9 4 - 53 Maintenanc e for every 50, 100, 250 and 500 hours service should be carried out at the After the en gine has been operated, all part s are at high temperature, so do not replace the filter immediately. Wait for al l parts to cool dow n before starting the operation. ne fuel piping system when the engine is running.
High press ure is generated inside the engi ne fuel piping system when t When repla replacing t cing the filter, wait for at least 30 seconds after stopping th e engine to let the inte rnal pressure go down before he filter. g any fire or flame close. Do not brin NOTICE Genuine K omatsu fuel filter cartridges use a special filter that has high ly efficient filtering abi lity. When replacing th e filter cartridge, a lways use a genuine Komatsu p art. The comm on rail fuel injection system use d on this machine consists of more precise parts th an the conventional inj ection pump and If any part system. Al nozzle.
other than a genuine Komatsu fil ter cartridge is used, dust or dirt may get in and cau se problems with the inj ection ways avoid using substitute par ts. When carry ing out inspection or maintenan ce of the fuel system, pay m ore attention than norm al to the entry of dirt. If dirt is stuck to an y part, use fuel to wash it off co mpletely. 1. Open th e engine side cover on the ri 2. Set the c ontainer to catch the fuel un 3. Using a filter wrench, turn filter cartri on remo 5. Coat the packing surface of the filter 6. Remove filter cartridge cap (A) and in