Komatsu — MAINTENANCE INFORMATION

. MAINTENANCE MAINTENANCE INFORMATION Komatsu Genuine Lubricants Use Komatsu genuine oils and grease. Choose oils and grease with proper viscosities specified for ambient temperature. 4 - 2 MAINTENANCE INFORMATION Do not carry out any inspection and maintenance operation tha t is not found in this manual. Service Meter Readin g Check the service me ter reading every day to see if the time has come for any necessary maintenance maintenance to be performed. Komatsu Genuine Re placement Parts Use Komatsu genuin e parts specified in the Parts Book as repl Windshield Washer F luid Use automobile wind ow washer fluid, and be careful not to let Fresh and Clean Lub ricants Use clean oil and gre ase.

Also, keep the containers of the oil a nd grease clean. Keep foreig n materials away from oil and grease. Check Drained Oil an d Used Filter After oil is changed o r filters are replaced, check the old oil and fil ters for metal particles and for eign materials . If l arge quantity of metal pa suitable action. rticles or foreign materials are found, always report to the person in charge, and carry out arry Fuel Strainer If your machine is eq uipped with a fuel strainer, do not remove Welding Instructions e ignition switch. than 200 V continuously. g cable within 1 m (3.3 ft) of the area to be welded. If grounding cable is connected near ectors, etc., the instruments may malfunction.

ng happens to come between the part being welded and grounding point, change the the avoid such parts. a around the work equipment pins or the hydraulic cylinders as the grounding point. Turn off the engin Do not apply more Connect groundin g cable within 1 m (3.3 instruments, conn ectors, etc., the instruments may malfuncti If a seal or beari grounding point to Do not use the are a around the work equipment pins or the hydraulic cylinders as the gro unding point. Do not Drop Things I nside Machine When opening ins pection windows or the oil filler port of the tank to carry out inspection, be careful not to drop nuts, bolts, or tool If such things are lead to failure.

If y s inside the machine. dropped inside the machine, it may cause d amage and/or malfunction of the machine, an d will ou drop anything inside the machine, alwa ys remove it immediately. r inspection. Do not put unnece ssary things in your pockets. Carry only t hings which are necessary fo Dusty Jobsite When working at dus Inspect the air cle aner clogging monitor frequently to see if t Clean the air clea ner element at a shorter interval than spec Clean the radiator core frequently to avoid clogging.