Komatsu — ELECTRIC SYSTEM MAINTENANCE

. MAINTENANCE LUBRICANTS, COOLANT AND FILTERS 4 - 6 Oil Sampling Collection interval ngine and components other than engine sampling the oil is well mixed before sampling. ling regularly at fixed intervals. Every 500 hours: E ngine and components other Precautions when Make sure that the oil is well mixed before sa Carry out samp ling regularly at fixed intervals. Do not carry ou t sampling on rainy or windy d ays when water or dust can get i For further details of KOWA, please contact your K omatsu distributor. Oil and Fuel Stora ge event any water, dirt, or other impurities from getting in.

Keep indoors to pr event any water, dirt, or other When keeping dru m cans for a long period, put th e drum on its side so that the filler port of the drums is at the side to prevent moistur e from being sucked in. If drums have to b e stored outside, cover them w ith a waterproof sheet or take oth er measures to protect t hem. To prevent any cha nge in quality during long-term storage, be sure to use in the or der of first in - first out (us e the oldest oil or fuel fir st). Filters Filters are extrem ely important safety parts. They prevent impurities in the fuel and air circuits from entering nt and causing problems. eriodically. For details, see the Operation and Maintenance Manual.

important equipme Replace all filters p eriodically. For details, see th e Operation and Maintenance M However, when wo rking in severe conditions, rep lace the filters at shorter interval s according to the oil an d fuel (sulfur content) bei ng used. the filters (cartridge type) and use them again. Always replace with new filters. Never try to clean the filters (cartridge type) and use them again. Always replace When replacing oil filters, check if any metal parti cles are affixed to the old filter. If any metal particles are fo und, contact your Koma tsu distributor. of spare filters until just before they are to be used. su genuine filters.

Do not open packs of spare filters until just befor Always use Komat ELECTRIC SYSTEM MAINTENANCE It is extremely dan gerous if the electrical equipme nt becomes wet or the covering of the wiring is damaged. This will cause an elect rical short circuit and may lea d to malfunction of the machine. Do not wash the inside o f the operator's cab wit components. h water. When washing the machine, be careful not to let water get into the electrical Service relating to the electric system is checking fan belt tension, checking dama ge or wear to the fan bel t and checking battery fl uid level. lectric components other than those specified by Komatsu.

agnetic interference may cause malfunction of the control system controller, so before ceiver or other wireless equipment, please contact your Komatsu distributor. he seashore, carefully clean the electric system to prevent corrosion. Never install any e lectric components other than External electro-m agnetic interference may ca installing a radio re ceiver or other wireless equip ment, please contact your Komat When working at t he seashore, carefully clean th e electric system to prevent corr When installing an operator's cab cooler or any o ther electrical equipment, conne ct it to an independent p ower source connector.

The cables to supply power to the optional equipment must ne ver be connected to the fuse, starting switch, or battery relay.