. MAINTENANCE LUBRICANTS, COOLANT AND FILTERS KOWA Analysis Items Analysis of metal wear particles This uses an ICP (Inductively Coupled Plasma) analyzer to measure the density of metal wear particles in the oil. Measurement of particle quantity This uses a PQI (Particle Quantifier Index) machine to measure the quantity of large iron particles in the oil. 4 - 5 If the coolant level is low, it will cause overheating and will also cause problems with corrosion from the air in the coolant. Grease twisting and noise at the joints. nt is used under heavy-duty conditions. Always use the recommended grease and Grease is used to prevent This construction equipme follow the change intervals Manual.
and recommended ambient temperatures given in this Operation and Maintenance the maintenance section are nipples for overhaul, so they do not need grease. ter being used for long time, add grease. ld grease that is pushed out when greasing. his Operation and Main tenance The nipples not included in the maintenance section are nipples for overhaul, s o they do not need gre If any part becomes stiff af ter being used for long time, add grease. ld grease that is pushed out when greasing. Always wipe off all of the o Be particularly careful to w wear of the rotating parts.
ipe off the old grease in places where sand or dirt stic king in the grease wou ld cause Carrying Out KOWA (Ko matsu Oil Wear Analysis) The oil clinic samples the oil p eriodically and analyzes it. This is a preventive maint enance service, which provides early discovery of abnormal p arts and wear of the drive parts of the machine. This t hen makes it possible t o ensure prevention of failures and red uction in downtime. Komatsu's long years of exp erience and rich supply of accumulated data make it p ossible to accurately d etermine the condition of your machine . This enables us to locate the problems and to recom mend suitable and tim ely repair methods.
The oil clinic charges the cu stomer only the actual costs, and provides an immediate report of the results of the analysis and recommendatio nsfor action to take. This low-cost service can save yo u high costs and incon venience in the future, so we strongly r ecommend you to avail yourself of this service. Others Measurements are made of items such as the ratio of water or fuel in the oil, an d the dynamic viscosit