Komatsu — CHECK AND ADJUST TRACK TENSION

. MAINTENANCE MAINTENANCE PROCEDURE machine. If the track tension is not at the standard value, adjust it in the following manner. Adjustment WARNING 4 - 29 CHECK AND ADJUST TRACK TENSIO (Machin e equipped with ro ad liner, s teel sho The wea r of the pi ns and bushings o n the u ill vary with the working conditions inspect t he track te nsion fr equently i n order to maintain the standard tensi Stop the machine on firm, horizontal ground when carrying out the inspect ion and an d type of s oil, so Checkin 1. Run nce equal to the l ength of tr ack on ground , then st op the 2. Cho ose woode n block (3) that wil l reach f rom idler (1) to carrier (2), then place it on top of t he track 3.

Mea sure the m aximum deflectio n betwe he rack and t he botto m surface of the w ooden andard de flection eflection "a " shoul d be 10 to 30 mm (0.4 to 1.2 in). There is d anger of plu g (1) flyi ng out unde r the high interna l pressur e of the grease. N ever loosen plug (1) more than 1 turn. Never loo sen any pa rt other (1). Nev mounting direction o f plug (1) If the trac k tension c annot b please co ntact your Komatsu distributor.