. MAINTENANCE MAINTENANCE PROCEDURE CHANGE OIL IN HYDRAULIC TANK, CLEAN STRAINER WARNING 1. Swing the upper structure so that the drain plug under the 4. Set the safety lock lever to the LOCK position and stop the engine. 4 - 57 EVERY 2000 HOURS MAINTENANCE Carry out the maint enance for EVER Y 500 HOURS, a nd EVERY 1000 HOURS SERVICE The parts and oil ar e at high temperature after t he engine is stopped , and may c ause burns. Wait for t he temperature to go down before starting the work. e oil filler cap, turn it slowly to release the internal pressure, then remove it. When removing th e oil filler cap, turn it slowly to release t he internal pressur Container to catc h drained oil: Min.
20 liters (5.28 U S gal) capacity Refill capacity: 2 0 liters (5.28 US g al) rench). Prepare a handl e (for the socket w rench will be between bo th tracks. 2. Retract the arm and bucket cylind ers, then lower th e boom and put the teeth in contact with the g round 3. Lower the blad REMARK For machines equip ped with a cab, th ere is onl y a safet y lock l ever on the left.