STRUCTURE, FUNCTION, & MAINTENANCE STANDARD ENGINE CONTROL Governor motor 1. Potentiometer 2. Cover 3. Shaft 4. Dust seal 5. Bearing 6. Motor 7. Gear 8. Connector A potentiometer for feedback is installed to monitor the operation of the motor. Revolution of the motor is transmitted through the gear to the potentiometer. Operation While motor is stopped Electric power is applied to both phases A and B of the motor. Function The motor is turned according to the drive signal from the engine throttle and pump controller to control the governor lever of the fuel injection pump. This motor used as the motive power source is a step- ping motor.
While motor is running The engine throttle and pump controller supplies a pulse current to phases A and B, and the motor revolves, synchronizing to the pulse. PC210/240-7K 10-163