STRUCTURE, FUNCTION, & MAINTENANCE STANDARD ENGINE CONTROL 12 1. COMPONENT Fuel control dial 1. Knob 2. Dial 3. Spring 4. Ball 5. Potentiometer 6. Connector Function The fuel control dial is installed under the monitor panel, and a potentiometer is installed under the knob. The potentiometer shaft is turned by turning the knob. As the potentiometer shaft is turned, the resistance of the variable resistor in the potentiometer changes and a throttle signal is sent to the engine throttle and pump controller. The hatched area in the graph shown at right is the abnormality detection area. 10-162 PC210/240-7K