. OPERATION TROUBLESHOOTING TROUBLESHOOTING METHOD OF TOWING MACHINE WARNING 3 - 129 AFTER RUNNIN G OUT OF FUEL When starting after r unning out of fuel, will wi th fuel and bleed the air from the fuel system For details of bleedi ng the air, see "REPLAC E FUEL FI LTER CARTRIDGE (PAGE 4-59) Serious injury or dea th could result if a disab led machine is towed incorrectly or if there is a mistake in the selection o r inspection of the wire rope. Always check that th e wire rope used for towing has ample s trength for the weight of the ma chine being towed. Never use a wire rop e which has cut strands (A) , reduced di ameter (B), or kinks (C). There i operation.
s danger that the rope may b reak during the towing gloves when handling wire rope. e on a slope. Always wear leather gloves when handling wire Never tow a machin During the towing o peration, never stand betwe en the towin g machine and the machine bei ng towed. Operate the machine slowly and be careful not to apply any s udden load to the wire rope. NOTICE The max. allowable dra wbar pull of this machine is 475,620 N ( 48,500 kg). Do not attempt to pull anything beyond this limit.
If the machine is s tuck in mud and cannot e scape und er its own power, or when to as shown in the equipped with a c the counterweight wing a heavy object, fit wi re to the to wing hook diagram on the right, or if the m achine is ounterweight, fit the wire t o the towin g hook on and tow the machine. When towing a ma chine, travel at a speed o f less than 1 km/h for a distance of only carrying out repai This is for use onl a few meters to a place that is suitable for rs. y in emergencies.