. OPERATION TROUBLESHOOTING OPERATION TROUBLESHOOTING 3 - 132 1. Connect the cl ip of booster cable (A) to the positiv e (+) t erminal of b attery (C) on the probl em machine . ooster cable (A) to the 2. Connect the c lip at the ot her end of b he positive (+) ter minal of bat tery (D) on t he normal machine. 3. Connect the cl ip of booster cable (B) to the negativ e (-) t erminal of b attery (D) on the norm al machine. 4. Connect the cl ip at the othe r end of boo ster cable (B) to engine bloc k (E) on th e problem m STARTING THE E 1. Mak e sure the clips are fir mly connect ed to the b attery terminals. 2.
Star t the engi ne of the boo ster machin e and kee p it runnin g at high idling speed 3. Tur n the starti ng switch of problem ma chine to th e START position, and start the engine . If t he engine doesn't star t at first, tr y it again aft er 2 minutes DISCONNECTING THE BOOSTER CABLES After th e engine h as started, di sconnect th e booster c ables i n th e reverse of th e order in which the y were connected. 1. Remove the clip of booster cable (B) from engine block (E) on the problem machine. 2. Remove the clip of booster cable (B) from the negative (-) terminal of battery (D) on the normal machine. 3.
Remove the clip of booster cable (A) from the positive (+) terminal of battery (D) on the normal machine. 4. Remove the clip of booster cable (A) from the positive (+) terminal of battery (C) on the problem machine. 1. Remove the c lip of booste r cable (B) fr om engine block (E) on the problem m achine. 2. Remove the clip of boost terminal of bat tery (D) on t he normal m achine. 3. Remove the clip of boost er cable (A ) from the terminal of bat tery (D) on t he normal m achine. 4. Remove the clip of boost er cable (A ) from the terminal of bat tery (C) on t he problem