Komatsu — IF BATTERY IS DISCHARGED

. OPERATION TROUBLESHOOTING OPERATION TROUBLESHOOTING the the STARTING ENGINE WITH BOOSTER CABLE When starting the engine with a booster cable, do as follows. PRECAUTIONS WHEN CONNECTING AND DISCONNECTING BOOSTER CABLE WARNING 3 - 131 Set the voltage of the char ger to match the voltage of the bat to be charged. If the corre ct voltage is not selected, the char may overheat and cause a n explosion. charger clip of the charger to Connect the positive (+) positive (+) terminal of the battery, then connect the negativ charger clip of the charge r to the negative (-) terminal of the clips securely. battery.

Be sure to attach When connecting the cables, never contact the positive (+) and nega (-) terminals. When starting the engine with a booster cable, wear safety glasses rubber gloves. Be careful not to let the norm al machine and problem machine con each other. This prevents spar ks from generating near the battery w could ignite the hydrogen ga s given off by the battery. Make sure that there is no m istake in the booster cable connecti The final connection is to the engine block of the problem machine, sparks will be generated whe n this is done, so connect to a place a as possible from the battery.

When disconnecting the boo ster cable, take care not to bring the c in contact with each other or with the machine body. NOTICE and clip should be suitable for the battery size. chine must be the same capacity as that of the engine to be started. r damage or corrosion. clips are firmly connected. The size of the booster cable and clip should be suitable for the ba ttery size The battery of the normal ma chine must be the same capacity as t hat of the engine to be star Check the cables and clips fo Make sure that the cables and Check that the work equipme nt lock levers and parking brake lever s of both machines are in the LOCK p osition. Check that each lever is in th e NEUTRAL position.

CONNECTING THE BOOSTER CABLES Keep the starting switch of th e normal machine and problem machine in the OFF pos Connect the booster cable a s follows, in the order of the numb ers marked in the diag