. MAINTENANCE SERVICE PROCEDURE ADJUST IDLER CLEARANCE backward under external (1) and guide plate is side play in the idler, or track to come off or resulting in ADJUSTMENT REMARK 4 - 33 The i dler move s forward and when worn. As t turns at an ang uneven wear, s le, causing t o adjust as fol pressure (2) become the idler 1. Drive the m achine for 8 to 12 m ( 24.4 to 36.6 ft) on fla t ground, then measu re clearance A (4 places: left , right, inside outside) between th e track frame and sid e guide (1). 2.
If clearance A is more tha n 3 mm (0.1 in) , remove bolt (3), then take out shi m (4), and adj ust to t hat t he clearance on one side is less than 0.5 mm (0.02 There are two t (thickness: 0.5 mm (0.02 in) a nd 1.0 mm (0.04 i n)).