. MAINTENANCE SERVICE PROCEDURE CHECK BRAKE PERFORMANCE WARNING NOTICE brake performance is normal. 4 - 54 If the machin e moves during the f ollowing operation , please contact your Komatsu distributor for repairs immediately Do not place the joystick in the 1s Otherwise, it will cause damage t Before start ing the engine, ch eck that the area around the machine is safe, then do as f 1. Start th e engine. 2. Start th e engine, and after completing the warming-up operation , set fuel control dial (7) to the SLOW position. 3.
Set wor k equipment lock FREE position then operate blade control leve control leve 3) to raise th e blade and ripper Leave t he work equipmen t lock lever (4) in the FREE p osition. 4. Set par king brake lever (1 ) to the FREE po sition 5. Depres s brake pedal (5), set joystick (6) i n FORWARD, then press th e shift up button t o enter 2nd spee 6. Operate fuel control dial (7) and gradual ly raise the speed t o full throttle. (Kee p the brake ped al depressed.) 7. Check t hat the machine This ndicates