. MAINTENANCE SERVICE PROCEDURE REMARK 4 - 55 CHECK OIL LEVEL IN DAMPER CASE, ADD OI 1. Remov e dipstick ( G), a nd w ipe th e oi l off with a 2. Fully in sert dipstic k (G ) into filler pipe (F), then remove 3. The oil l evel shoul d be between t he H and L marks on d ipstick G). f the oil is below th e L mark, add o il throug h the dipstick holder. f the oi plug. Af l is above ter drainin the g the H mark, dr oil, check ain t the he e oil le xces vel a s oil gain Check th e oil level with the engin e stopped When ch ecking the oil l evel, if the machine is at an angle , move it to a ho rizontal po sitio n before c