. MAINTENANCE SERVICE PROCEDURE EVERY 2000 HOURS SERVICE CHANGE OIL IN HYDRAULIC TANK, REPLACE HYDRAULIC OIL FILTER ELEMENT WARNING ground securely, filler (F) to internal pressure. Then, remove the cap. 4 - 69 Maintenan ce for ev ery 250, 500 a nd 100 0 hour s service s hould be carried out at the same The oil is at high te mperatur e immediately after the machine h as been operated. Wait for the oil to c ool down before changing the oil. When re moving th e oil filler cap (F), turn it slowly t o release th e internal pressure, then remove it c Refill ca pacity: 1 20 liters (31.70 US g 1. Lower the blad e and ripper on the g engine and slo wly turn the ca p of o stop the the 2.
Remov e drain plug ( 1) at the botto m of the tank and loosen drain v alve (2). After draining t he oil, tighten drain plug (1) and drain v alve (2). When loosenin g drai n valve (1), b e careful not to get oil on yo urself.