Komatsu — EVERY 2000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN DAMPER CASE AND BREATHER FILTER, CLEAN DAMPER BREATHER WARNING oil. 4 - 72 The oil is at high temperatur e immediately after the machin e has been operated. Wait for the oil to cool do wn before changing the R efill capacity: 2.1 liter 1. Remove breather (4) Wash out dust remai flushing oil. 3. Install breather (4) to 4. Remove slit plate (3) , breather filter (5) and holder (6) on the per cover. the upper part of the dam 5. Wipe off dusts stuck t o the slit plate and holder a nd th en wash them with clean light oil or detergent liquid. Replace the filter with 6. Open the inspection 7. Remove drain plug ( and drain the oil.

After draining the oil, 8. Pull out dipstick (1), and add oil to the specified level through vel is between the H and L marks on see "CHECK OIL LEVEL IN DAMPER GE 4-55)". cover. leve l through oil 9. dipstick. For details, CASE, ADD OIL (PA 10. Close the inspection