John Deere 450DLC, 650DLC, and 850DLC Excavators — Grease Working Tool Pivots and Links

Maintenance—Every 10 Hours or Daily CAUTION: High pressure release of oil from pressurized system can cause serious burns or penetrating injury. Relieve pressure by pushing pressure release button (1). 4. Push pressure release button. TX1001796A –UN–12JAN06 5. Insert 5 mm hex wrench to remove cap screws (3). 6. Remove cap. 7. Add oil. (See Hydraulic Oil in Section 3-1.) 8. Install cap and cap screws. 1—Pressure Release Button 2—Hydraulic Tank Cover 3—Cap Screws (4 used) TX1001798A –UN–21DEC05 DW90712,0000011 –19–07JUN07–2/2 Grease Working Tool Pivots and Links Grease working tool pivots and links (5 points) until grease escapes from joints. Grease every 4 hours for first 20 hours.

Grease every 10 hours thereafter. TX1001846 –UN–03JAN06 Ten Points: Right Side Shown DW90712,0000017 –19–07FEB06–1/1 3-4-5 010609 PN=142